Hull Design & Fairing
The sections will not update unless you use Orca3D’s custom control points. Turning the standard Rhino control points on and editing will change the shape o...
Mon, 28 Sep, 2015 at 4:32 PM
Bow cones may be easily added to a
hull, using Rhino’s Sweep 2 Rails function.
Begin by designing the hull
surface so that the edge that would ...
Thu, 1 Oct, 2015 at 1:03 PM
Partial length chines (longitudinal chines that start at one
end of the hull, typically the stern, and fade out at some longitudinal
location) are becomin...
Thu, 1 Oct, 2015 at 1:08 PM
When fairing a hull, it’s often
helpful to foreshorten or “squash” the view in the longitudinal direction, to
accentuate the curvature. Rhino 5 allows...
Thu, 1 Oct, 2015 at 3:29 PM
For unrolling developable surfaces, Rhino has an “unrollsrf” command. Rhino also has a “devsrf” plug-in (which is free from https://www.food4rhino.com/app/d...
Tue, 9 Jul, 2019 at 12:18 PM